This will ensure that you are getting the perfect suspension system for your car’s needs.

How to adjust a coilover. Physically remove the helper spring completely from the coilover assemblies. Place the washer and nut at the top part of the plate and effectively tighten it to properly position the coilover. The better step is that we set the preload first and next go for height adjustment.

You can replicate the same adjustments on all four. How to lower your car. Step 2, tighten the lock ring ① & ②.

You should not use the spring for height adjustment at any cost. Once the preload is settled, we should not adjust it again in. You can also adjust the preload after the coilovers are installed.

The most common mistake people seem to make when they’re adjusting their coilovers is using their locking collar on their coilovers as a height adjustment tool. To adjust your truhart coilovers, loosen all of the screws (2 per side) and move the adjustment ring up or down to achieve your desired height setting. You will need to remove the coilovers from the car and use a 17mm socket and impact gun to.

How to adjust bc coilovers the proper way Coilovers also provide a stiffer ride, which lets you lower your car without scraping. It’s essential to know how far the tire can go down without rubbing the fender.

I replaced my stock shock absorbers that had h&r lowering springs mounted on the. First you need to measure the distance from the top of your tire to the fender. In this episode, gary from aldan american explains how to adjust coilovers at the aldan shock lab.getting the perfect stance and exact ride height you're loo.