You’ll use this bobby pin as a lever.

How do you pick a lock with a bobby pin. This quick video will give you some tips on how to pick a lock with just two bobby. Apply minimum torque to the tension wrench, insert the bobby pin into the keyway, make use of a vibrating motion, or scrubbing over the pins, after a few se. Place the shorter end of your wrench inside the keyhole’s bottom.

Next, stick the straight end of the hairpin about one centimeter, or. Insert the tools and start picking. Make a slight bend at the tip of the straight end.

Then insert hairpin b into the middle of the lock all the way back. To pick the lock you are going to need two tools: Or maybe you've always wondered how they do it in the movies?

Now insert the tension wrench tool (hairpin a) into the bottom of the lock. Take off the rubber or plastic coating on the end of the bobby pin to form two. These are the type of locks that can easily be bypassed with a bobby pin.

First verify that your door lock is tumbler pin lock. How do you pick a deadbolt with a bobby pin? The pick’s purpose is to lift the pins flush with the shear line just as the key does.

If you want to flush the pin against the face of the door, you have to put it in about 1 centimetre. Bobby pins and paperclips are actually kinda hard to make lock picks out of. Add tension to the handle of this wrench according to the lock’s turning direction.