Run the pencil at the very least 1 inch around all 4 edges of the mirror,.
How do you hang a mirror on a door. Use a carpenter's level to adjust the position to make sure it is plumb and level. First, we must measure the surface of the door to the mirror we want to hang on it. If you have a hollow door, your options may be.
You need to first find a door that is the right size for your mirror. Make sure you have the right sized door mirror for your wall space (height and width wise) and if it is going to hang on a flat surface or an angled one. Adhesive strips are strips of sticky tape that you attach to the back of the mirror.
Then you peel off the backing and stick the mirror to the door. Hold the mirror approximately the door to note its positioning on the door with a pencil. Use the piano wire or locate the screws exactly aligned with the “d” rings.
Make a pencil mark on the door at the top. The mirror must be held against it and the hook points of the mirror should be measured. With the mirror in place, trace a faint line.
Hold the mirror against the door where you want it to hang, with the back side facing out. Here's a quick video showing you how to hang a door mirror with no hardware or damage to your door! Draw light lines on the door using a pencil to help you get the correct measurements of the placements where.
Set up the upper clips. Follow the manufacturer’s application instructions. Hold the mirror on the wall where you want it to hang.