Rags, a sponge or paper towels.

How do you clean windshield wiper blades. Add a certain amount of toothpaste to the microfibre cloth. The thing is your rubber wiper blades get brittle and covered in dirt, road grit, and grease and that is usually what causes them to streak and wipe the water off in a very patchy way, so by. Unlatch your old wipers, and pull the blade off.

It’s always best to replace both wipers at the same time even if one has a. Start by taking an old rag and running it up and down the wiper blades to remove any large particles of dirt. Just follow these simple steps:

Bucket of warm, soapy water or washer fluid. Wipe the towel or rag down the length of the blade. You can also clean the blade with hot,.

Wipe the wiper blade edge with a clean towel dipped in washer fluid. It is my recommendation that if you are. Once one rag is filled with dirt, you’ll need to switch to another.

Spray bottle that is a minimum of 20 oz and unused. You need enough rags to wipe built up dirt and crud off of your wipers. First of all, you have to make the windshield dry along with a lint free, old damp cloth.

Most wipers are attached with a small lever or tab. Change the location of the towel you use to wipe. Using these to clean the smears off of your windshield and wipe down each blade will help remove stubborn gunk that’s keeping your wipers from doing their job.