Wipe the indicator screen with a damp cloth.

Hoover steamvac spinscrub not spinning. The port at the front & hole on bottom provide an air path for the vacuum to poll air through this assembly & spin the brushes. 3:43 reassemble the cleaner and test: Why is my hoover steamvac spinscrub not spinning?

While checking the machine for errant part placement, check the position of the brushes and. The hoover steamvac problems with suction tend to involve the tanks, nozzles and brushes. Locate the indicator screen on the front of the machine and lift up the clear cover.

Try to rinse the water tank, including the foam filter, and also rinse the nozzle as it. The brushes haven't been spinning and i watched all the other videos i could. Hoover spinscrub 50 is a powerful and.

In case your brush on the vacuum cleaner is not spinning, the problem is most likely with the belt, whether you have a windtunnel, linx, respond, swivel, or cordless model. Check to ensure that the. Question about hoover v1 steamvac spinscrub vacuum.

First, check to ensure that the turbine motor is able to spin freely. Disassembly of cleaner 00:00 remove motor assembly and replace bearing: The most likely cause is that the bearings have seized up and will not move of their own volition.

If the brushes spin freely, then continue on with the disassembly. Go to hoover.ca stay on hoover.com get 20% off sitewide* with code: Hoover spinscrub my brushes will not spin after being taken out to clean.