The modular pontoon sections can be plugged together by dovetail guide.

Homemade pontoon logs. FACTORY NEW u-shaped transom pods for mounting behind u-tubes to make center transom tube combinations UP TO 300 HP motors are available for bolt-on applications for 1000. Otherwise the trapped salt may eat away at my logs and cause pin holes so I am told. Since my pontoon will be used primary in salt water I need to find a way to lift the pontoon logs off the bunkers of the trailer so that I can clean the salt out from underneath the logs.

On August 1 2015. It is in rough condition and the saltwater has taken its tole on the logs over the years. Cut 2 pieces of 34-inch CCA marine plywood which fit each end of the pontoon like a cap.

We chose this project based on two things. Apply a heavy bead of construction adhesive to the end rib and then screw the plywood to the end of the pontoon with the 2 inch screws. The modular float system PT01 is especially suitable for DIY-construction of pontoon boats and small mobile house boats or pontoon rafts.

There are three primary types of pontoon designs used on current pontoon boats. Waterproof The Pontoon With Fiberglass. These final pieces seal the pontoon but the pontoon isnt watertight yet.

The 3 Basic Shapes of Pontoons Designs - Their Pros Cons. I prefer to call this my pontoon boat but many have referred to it a. I was told by Tracker Marine that they do not use.

The hubby are thinking of giving this diy pvc pontoon boat a try. Saw the plywood sheets according to the size you desire for your boat deck and place it on the cross-channels. I have an older 20 pontoon that we use for crabbing and fishing in the Chesapeake bay.