This piece will look at the factors that determine how long a grout sealer takes to dry and why it could be quicker with some brands.

Grout drying time before showering. On average, grout takes between 24 and 72 hours to fully cure. Wipe off your tiles with a dry cloth to ensure they won’t be. Apply a second coat of sealer following the same process described previously.

However, this time can be increased or decreased depending on where you are applying the grout. Otherwise, all your efforts will go in vain. Grout is used to fill the gaps between walls, usually tiles, so that they stick together.

I always recommend 24 hours minimum (the longer the better) i don't personally think 12 hours is enough, iv seen some manufacturers recommend an 8 day curing time! Even though your shower grout looks dry, using it too early or sealing it before it's ready may damage it, leading to premature failure. For the grout to work like magic, it must be cured for a good amount of time.

I suggest that you tape up some poly to protect the new grout if you really need to use the shower before the prescribed. How long for grout to dry before showering. After grouting the new tiles, you must wait at least 48 to 72 hours to allow it to cure completely.

Therefore, you should check the grout every 24 hours until it’s cured. In this article, i will walk you through the two most critical factors. However, you should not shower until you’re certain that the grout is dry.

The usually curing time for a freshly grouted surface is between 48 to 72 hours after which a sealant should be applied on the surface. For grout to work its magic, it should be left to dry for a reasonable amount of time; How long for grout to dry before showering.