You might want to consider this:
Fix leaking spigot handle. Remove the handle and nut (photo 1) and pull the stem from the faucet (photo 2). Use a pair of channel locks to hold the body of the spigot still while using an adjustable wrench to loosen up the packing nut. 6.) inline spigot leaking from the nozzle.
Unscrew the faucet mounting nut, and extract the entire stem from the faucet body. Steps for fixing a leaky hose spigot: Remove the handle from the spigot by removing the handle screw.
Close the valve all the way down. Turn water supply back on go back to your water meter or main water supply to your home. Unscrew the packing nut beneath the handle of the spigot.
Richard explains that in most circumstances, a leaky hose spigot will leak from one of two places: If your spigot is leaking from the nozzle when off, then the rubber seat is not sealing properly when the handle is tightened down. Turn off the water to the spigot, either by turning off the main water supply for your home or by turning off an inline valve that is controlling the water line to the area where the.
Turn the faucet handle clockwise to turn it off. To do this you have to turn off your water. Before shoving the new gasket in, temporarily put the handle back on and turn the water on to flush out the debris from the old crumbly gasket.
Uninstall the bonnet nut by. Remove the handle by unscrewing the screw fastener using a phillips head screwdriver. To get the stuck handle off , screw the packing nut back on , insert a open end wrench just larger than the stem diameter , possibly two wrenches side by side to fill the space.