English saddle seat size calculator | prohorse.

English vs western saddle seat size. Place a tape measurer at the centre the cantle measure to the nail head (look at the inch side of the tape measurer not the cm side). The saddle should not “pitch” the rider in either direction and allow a balanced seat position. The space between you and the fork should be at least 4 inches.

Such as the english saddle, where you have a hand in the front hand in the back. A guide to stock saddle v english saddle seat sizes. English saddle seat sizes are recorded every 0.5 so round.

The general rule of thumb is to subtract 2 inches for the western seat size you will need. English saddles have many more combinations of variables, some based on the same parameters as the western saddle but with different nomenclature. English saddles don’t convert exactly.

To check if the sizing is correct for you, sit with your back placed against the back of the seat. You should have approximately a hand’s width of room both in front and in the back of your seat for the english. The english saddle is much smaller, with much less surface area on.

This seat size is simply measurement of the distance from the base of the horn to the top middle of the cantle. The following will give you a very general idea of saddle sizes: On the other hand, the seat on a western saddle is built on top of the tree by the saddle maker.

The difference is about two inches, although i ride in a 15 western saddle and an 18 english saddle (the english saddle has a really deep seat, so it measures a bit longer). These different uses are reflected in the design of the saddle. Au (aud $) for horses.