Question i mounted a bar wall today on a ceramic tile floor.

Drilling hard floor tiles. The best method i've found found. It helps if you put a bit of masking take where you. No need for masking tape, just put the tip where you want the hole, give the back of your drill a sharp whack with your free.

Steps 1 prepare the area before you drill through a tile put a drop sheet down to protect your floor. This time, apply a normal amount of pressure. Place a towel under the hole to soak up any excess water.

Always mark the area where you want to drill your holes. You won't need an sds drill, but you will need a diamond coated drill bit, and don't use hammer action. Tape the tile with masking tape where your holes.

Then take a hammer and very lightly tap. (it should go in easily if. You can do that using a marker pen but you want to add.

The tape will keep the drill bit from slipping, and. Drilling through the glaze on the face of the tile is the hardest part. Tiles such as ceramic, granite, glass, marble, and porcelain tiles are very hard.

A discussion of power tools and bits for effective drilling into hard ceramic tile. You can get them from b&q. Put an indicator at the hole’s center.