The poly gel tube comes with.

Do you need a uv light for polygel nails. Apply a thin layer of polygel on top and wait for it to dry. File the surface of nails to make sure that the rough surface has better adhesion to apply. Do all these necessary steps:

After placing the hand beneath the light for 60 seconds, wait for the polygel to dry. Gel nail paints are designed to harden when exposed to various types of light and sources. Usually, you will not experience.

Cover all areas of dual form & gel, including small spaces. Glue a nail tip to the free edge of your nail, properly prep the seam, apply dehydrator/ph balance solution, apply gel base coat and cure for 30. Set the timer for 60 seconds and place your fingers beneath the light.

It is recommended that you use a gelish 18g / 36w led light as polygel is manufactured to be cured all the way through at a wavelength of. The nails are cured (dried) for a duration specified by the. Repeat steps 1 and 2 until you have applied.

The most commonly recommended light to cure. Keep doing this until you have a desired polygel overlay on the nail. A nail brush cleaning solution is another important thing.

Take a small amount of poly gel out of the tube with the spatula tool and apply it to the dual form. Clean up any polygel excess using a nail file, clean up with. The polygel material comes with its solution called slip solution that helps to take the excess off the nail once we.