The best transducer mounting height is at the bottom edge of the transom, with the lower surface of the transducer protruding about 1/32 to 1/16 inches below the bottom of the boat.

Diy transducer mount for pontoon boat. Once you have found the center, you. You are somewhat limited when it comes to mounting a transducer onto a pontoon boat because you cannot penetrate the pontoon tube itself. Mounting arm kayak transducer mount reviews scotty #141.designed.

Be very careful not to puncture the tube. So, i think i will cut another 9x4 board and glue them together to make a 1. Are a necessity when mounting your transducer.

Then insert the transducer’s pivot posts into the slots. Open the retaining cover on the top of the transducer bracket by depressing the latch and rotating the cover downward. Enlarge the holes in the boat so your screws will get a bite but not so small that you will strip the heads when you install them.

Then i mounted a vblock female on my rail and a male on the pvc. Adjustable transducer mounting brackets in 2023: First, you need to find the center of the hull.

Publicado el diciembre 25, 2021 por. By january 21, 2021 staten island railway track map. So, it will have to support the weight of all 3 transducers and the 1/2 inch thickness may not be enough.

Install the transducer tim barker 5. Diy transducer pole mounting i will be mounting a mega live transducer pole to my boat using pvc. Scotty#141 kayak/sup transducer mounting arm ;