The demon hyper speed ski tuning kit comes complete with one pound of wax, iron, nylon and brass brushes, a metal scraper, a polish pad, and a whole lot more.

Diy ski wax. This will allow the skis to absorb the wax more efficiently. Set your waxing iron to the suggested temperature on the wax packaging. In fact, in this kit.

You want to start off with the base and the. My local shop has one of these. You can also buy liquid wax that uses a rag for application.

Let the skis completely cool for two hours or more at room temp. The main body of the ski that contacts the snow is called the base, the edges are the metal strip along the edge (obviously). Hold the iron vertically with one corner facing down, just above the ski.

Swix north ski snowboard wax tuning kit mass transit. Run the bar of soap over the cheese grater. Grate the entire bar into flakes and place.

Measure, cut and install the bike tube for ski/snowboard supports. Hold the hot iron above the ski with the tip. Place a fan on both sides of the.

Use hinges to allow the box to open from either the top or side. Once cool, scrape again with a recently sharpened scraper. Position the heater in the middle of the box floor, with the elements facing up.