This is a 8x20 modular pontoon boat I designed made from 12 PVC watermain pipe.

Diy pontoon hull. You can make a simple pontoon by welding together two or three 55-gallon drums end to end. Centre hull 1 pod longer. Once you have chosen the DIY kit and model of the pontoon boat you can then proceed with the aesthetics like the fence design accent finish panel color and other items.

The other benefit of these hull forms is the immersed volume which will support more than pontoons and if shaped well will also be more efficient underway. If your existing boat lift is already set up with bunks you can add another set so that each of your boats pontoons is supported by a pair of bunks. For fishing picnics on the water leisurely.

The pontoon shall be built as per the shipping rule. On this boat hulls a massive. The standard pontoon wall thickness is125 minimum 100 available for small kits.

Our aluminum pontoons are made with type 5052 H32 an aluminum magnesium alloy most resistant to corrosion in fresh and sea water. With the Pontoonz DIY concept construction is easy. There are solid welded chambers every 5 and each pontoon has a full length under keel and side keel for added protection.

Pontoon number 1 for Pontoonz in 2005. Just add table chairs and picnickers. Pontoon boats have either aluminum or fiberglass pontoons.

If you need to lift and support a tri-toon you can add a third pair of bunks. The deck is five 4x8 sections made from treated 2x6 lumber. The first thing you should do is a preliminary weight study given the general accommodations workup youve started.