Cut one piece of fabric using your rotary cutter so it measures 3” wide x 40” long.

Diy fabric lanyard. Each pair of 2.75″ squares adds four inches to your overall length. Sew the end of the straps together with a 1/8” to 1/4” seam allowance. If you want to make both the lanyard and the badge holder, these are all the supplies you’d need to pick up at the fabric store:

2) repeat so both sides of the long strip are ironed and creased 1/4″. Sew the strips together using a 1/4″ seam allowance. Fold each long side in toward the middle and iron.

Get started by pinning your two long strips right sides together along one long edge. Ok, some details about that. The coiled paracord lanyard is an expandable coil key chain with a 550 paracord sheath.

Fold the top edge down to the crease. Bring the flat end of your. Free sewing projects that are both cute and useful.

Cut lanyard fabric and shapeflex to length (2″ x 38″) fuse the glue side (the bumpy side) of the shapeflex to the wrong side of the lanyard fabric. This will give you a. Sewing a fabric diy lanyard.

1) fold the sides of the long strip 1/4″ and iron. Lay the lanyard with the seam side. Tuck the other short end of the lanyard under the folded edge.