As you install your subway tiles, you will likely spend more time cutting tiles than installing them.

Cutting subway tile around outlets. Hi brian, your best bet is to clamp the tile to a flat surface (like a piece of plywood) and drill a hole at each of the four corners using a diamond coated bit (carbide will work, too, but is slower and. That is especially true when you are reaching the end of the cut. Line up the first of the two horizontal marks with the saw blade.

Before you begin tiling, check out the existing surface you’ll be working on. But if you want to cut the tile i use an occilating tool with. One old styler tool that is still used today is a tile breaker.

Now pull the outlet slightly out of the box. If you are installing a backsplash behind a sink or area. I was think of doing beveled tile for a little more interesting backsplash.

When you are marking the tile, you need to be sure. In this video you'll learn how to cut tile. Subway tiles are a popular choice f.

This is where the tile tends to chip and blow out. Set the guide, or fence, for the long cut. Turn on the saw and cut slowly until the blade reaches.

Pull that plug, nibbler tile pliers can probably get in there and cut it. Flat subway tile if need to cut around outlets? You could put in a gfi breaker.