If you intend to cut acrylic into a nonlinear.

Cutting acrylic sheets with jigsaw. Mark the cutting line on the acrylic sheet. In principle, both circular hand saws and jigsaws are suitable for most acrylic sheet grades. To cut acrylic sheets with a jigsaw, you will want a jigsaw with a good range of speed control and a variable speed control will help out a little.

How to cut an acrylic sheet with a circular saw materials required. Here are the steps involved in cutting acrylic sheet using a circular power saw. The function operates by going up and down in fast motion.

How to cut perspex using a circular saw and a jigsaw. As with the previous method, it is important that you draw the line that you want to cut first. A blade with 24 or more teeth is ideal for cutting acrylic.

This is due to the fact that they produce a relatively clean cut and also allow. If you are cutting the material. Whereas for acrylic up to 4mm in thickness, you could simply use a scriber and the blow.

So use a marker to draw the line. When cutting thin acrylic with a knife, it’s best to clamp the. Polycarbonate sheeting can be cut with a basic pair of hand shears if the thickness of the sheet is less than 0.125 inches (1/8 of an inch).

Thicker acrylics are best cut with a jigsaw or circular saw. Draw the line that you want to cut. Position the jigsaw on one end of the cut, taking care to align the jigsaw on the cutting line.