Laminate is also extremely tough if not impossible to repair, so any damage will most likely require replacement of the.

Cut backsplash off laminate countertop. Remove laminate counter backsplash and replace with tile. Use multi function oscillating tool to cut. Use a drill to remove the screws and then the countertops should lift right off.

Cutting backsplash off laminate countertop. A laminate backsplash should go with a laminate countertop. Tape edge guide to the counter top in the corner with double sided tape.

Cutting off the backsplash takes off. The backsplash is often trimmed prior to. Make your self an edge guide about 1 wide out of 3/4 plywood.

Force a putty knife vertically down between the backsplash and the wall. Place crow bar or straight edge between the laminate backsplash and the wood. Now, that can be filled and.

A blade depth of 1/8th inch. A common fit for the back splash is to make contact at the top and leave a gap below, which might mean if you cut the top off, there will be a gap. This video i show you how i removed a laminate backsplash from my friends kitchen counter to prepare for epoxy counters and a new tile backsplash.

Slide the putty knife along the top edge and perimeter of the laminate to cut it loose from the glue. Before you compose a detailed answer, be aware that shreya, poster of this question, is a qpp with 15,300+ questions vs 16 answers posted on this site. It's cheaper and easier in the long run to order a flat deck top with the edge that you want, in the color and finish that you want.