Wrap each fitting with yellow ptfe tape, looping around the fitting two or three times in a clockwise direction.
Clothes dryer gas line installation. Turn the gas back on and swab each joint with a solution of 2 tsp. Unplug the dryer's power cord from the wall outlet. Are you looking to invest in a gas line for your homes clothes dryer?
If your gas pipe is 20 feet long or shorter,. It is also best to locate the dryer in an area that does not fall lower than 50 degrees f. The amount you pay in labor will ultimately depend on who you hire and whether or not you have an existing gas line and hookup for your gas dryer.
From or limit installation of clothes dryers in garages, closets, mobile homes and sleeping quarters. Before you begin, you want a clean dryer to work with. Then install a tee into the gas supply line somewhere at the furnace or water heater were it will not interfear with thoseappliances.
There are times where your stove may wind up on the fritz and the culprit is the corrugated connector, also known as the supply line. (check with your local building inspector.) fire hazard if you install the dryer in a. First, turn off the main gas at the meter.
Then, empty the lint tray. The old dryer is removed, and the new gas dryer install. Connect the dryer vent to the dryer and secure it to the dryer using a clamp and the screwdriver.
1/2 inch black iron gas pipe when using 1/2” black iron pipe, it is best to wrap the throat of the pipe that will come in contact with the receptacle with black vinyl tape. The dryer will have to work much harder to reach optimal temperature if placed in an. Feed the dryer vent into the wall and then screw the dryer vent cover to the exterior wall.