Brass wool is softer and less abrasive, while the harder stainless steel wool has a longer life.

Clean soldering iron tip black. There are a few different ways to clean soldering iron. Lastly, try not to scrub the tip as you can damage the protective plating. Before cleaning and polishing, the soldering iron must be cool and dry to successfully remove all the dirt and oxidize parts.

Before using and before storage tin. Heat your soldering iron up to the low end of a typical work range, generally between 280 and 320°c. Let the soldering tip and solder abrasives repeatedly rub.

Don’t wipe excess solder from the tip. First, gently pass over each part of the soldering iron tip. At work we typically replace.

Cleaning soldering iron tip sandpaper. Place the soldering iron in the iron stand, apply plenty of solder on the tip. Solder on the iron tip will solidify and.

Usually a gentle wipe is all that is. And then turn off iron. To clean your tips, use either brass or stainless steel wool.

Clean the welding tip with. Take your brush and clean the soldering tip. If the tip comes to a point then rotate the tip as you sand.