To clean the spa filter using vinegar you are going to need:

Clean pool filter with vinegar. After the duration of 15 to 30 minutes, you must now do a second scrub on the tiles. It is in the second round that you can scrub off the stubborn grime. Begin by backwashing the filter for a few minutes to remove as much dirt and debris as possible.

Take out each grid or “finger” of your filter. Here’s how to do it. Mix equal amounts of water and vinegar.

Immerse the electrodes in vinegar for a maximum of 10 minutes. In a small bowl, dilute the vinegar by mixing up a 50/50 solution with warm water. Take large water content such as basin and fill it with water and 5% muriatic acid (hydrochloric acid).

Just prepare in a basin a mixture of water and hydrochloric. A container large enough for your filter to sit in so you can cover the filter with liquid. In a bowl, combine hot water with a couple of drops of.

Ideally, you want a 50/50 concentration of vinegar and water, so you may have to pour in more than a half gallon of vinegar. Again, turn off the pool pump before twisting the valve to ‘filter’ mode. The tougher substances like calcium require a soak in a diluted vinegar solution.

You can use a garden hose to rinse. Mix a portion of 9 parts water with 1 part simple green in a spray bottle to form a cleaning solution. If your filter is particularly dirty, mix equal amounts of water and simple green in the.