Remove the four screws to get access to the battery.

Changing battery in prius key fob. Put everything back together by. After removing the case, you will observe four tiny screws. Turn it like a key to pop key fob open.

Screw all the screws back in. Pull the physical key out. Cr1632 coin battery 🪙 you need:

Slide the tab at the bottom to the left and drag the key. # step 1 to be able to change the battery, you need to remove the key cover first. 17 18 toyota prius prime with a/c remote function toyota part number:

Check the position of the smart key switch where the steering column meets the dash panel. It certainly is odd that you would manifest this symptom. If done correctly, the entire key fob will separate down the middle, revealing the battery.

Slide the tab at the. There are a total of 6 steps for you to change the battery in the prius key. Where key was inserted you will find a small recessed slot, insert flat head screwdriver and pry open.

Once the spare manual key is pulled out, focus on the same tab and slide the back of the key to remove the casing of the prius key. Use the metal and insert it into the center slot of the key fob. Replace the battery with a fresh cr2032 battery.