Be sure that the nails are long enough to go through.
Ceramic tile on wood subfloor. (3 mm in 3 m) and no more than 1/16 in. From the beginning it has been. The subfloor for a ceramic tile installation must be completely flat, dry and rigid.
Tiling on wood surfaces is all. Set a cereal bowl on the plate. Plywood and osb are the two most common materials used for floor decking, and typically they are 5/8″ or 3/4″ thick.
Lift one sheet (leave the rest in place) and spread thinset directly onto the subfloor filling the area left by the sheet (use a 1/4 x 1/4 notch trowel). For tiles with at least one edge 15 in. How to lay ceramic tile on subfloor;
Ceramic tiling can be installed onto 23/32” osb subflooring panels where the panels are supported by 16” o.c. Yes, but because wooden floors naturally bend, bounce and expand, tiles can end up cracking under the pressure if installed incorrectly. With a separate container, fill the bowl to the rim.
You should see some ripples from vibration, but. Lets use the example of 38 inch which is a common grout joint spacing for ceramic tile. Then, walk on the plywood around the bowl.
This pictures porcelain wood tile looks like display you some inspiration. (0.38m) or longer, the maximum allowable variation is no more than 1/8 in. How to lay tile over plywood you tiling and plywood 7 things you should how to lay tile on a plywood subfloor tiling over plywood subfloors jlc online