On an ideal slip the boat will simply float off the trailer unfolding as it does so with no effort required from the driver.
Catamaran hull chocks. Because they are beach cat hulls they are very light around 40kgs under 100lbs and so it is easy to do. Use these stern supports to secure your catamarans hulls during beach storage to prevent moisture build up and grass. Davits and Chocks UMT is well known for its commitment to old world custom crafted marine technology throughout every phase of the fabrication and manufacturing process.
The buoyancy of the hulls lifts them as the trailer is reversed. Trailering beam is under 8ft. Taking the dinghy out of the water improves performance under sail - or limits fuel consumption.
Untie boat lower chocks and ensure that hulls are free to swing out. A flexible line extends through the axle and. 716 inch electrical welded aluminum plating.
Annular hull chocks are attached to the opposite ends of the axle and each chock has a convex inboard face which is covered with outdoor carpeting. But you dont get something for nothing. A somewhat similar situation could actually occur on dry land if a boat yard chocks the hulls up unevenly or if the end of each hull is supported on one of four chocks then one of the four gives way although in that case the mast compression would probably be less significant.
Systems-HULL DECK AND SUPERSTRUCTURE HULL CONSTRUCTION TYPE. The flat hull bottom makes it very easy to launch and retrieve while no trailer chocks are needed. The relatively narrower hulls are more efficient especially at moderate and higher speeds.
Fits the hulls of H-16 F18 F16 HT Javelin A Cats Nacra 17 Nacra 20 H-20 H-18 and many more. The centre of gravity is still relatively low so no problems when driving. Made from a highly durable closed cell foam that does not absorb water mold or corrode.