Dan I installed a CD anchor roller on Chip Ahoy in 2004 primarily to get my old Danforth off the deck and give the new Delta Fast-Set a place of its own out of the way.

Catalina 22 anchor roller. I had a chance to try out one of my Anchor Rode Storage Buckets. After test fitting the Ronca 10 and 15 over the weekend the smaller of the two Anchor Rollers from CD will have sufficient length. One anchor and rode can create enough of a mess let alone 2 anchors and rodes which is what I carry.

You may find some of these items are cheaper from Amazon through the links at the bottom of this post. The front of the roller has a bolt going thru it on top of the roller and there is not a lot of clearance. A feature first introduced in 1973 that allows the roof of the cabin to be lifted for more headroom and ventilation at anchor although we rarely use it.

3 Cut off the vertical part of the original anchor roller. Catalina 22 OEM Style 150 Genoa with Hanks OEM original equipment Style Replacement JibGenoa Made with High Quality US Dacron Wichard Type Hanks for Easy One Handed Sail Changes Leech Line Tell Tales Sail Bag Included. Someone quiered about the use of an anchor roller from Catalina Direct similar to those used on the C22 that uses the bolts on the stem fitting for mounting.

A short time back. Please verify the dimensions with the diagram. 4 Position the anchor roller to find the good fit.

There you can raise the anchor using one of the. 6 Epoxy the holes. My 22 Catalina has a 14 Delta with 30 of chain and 250 of nylon rode through a Catalina Direct bow roller.

The furler drum clears the anchor shank by about an inch as Id hoped it would. I added a 25 trip line clipped to the pulpit with a carabineer on its end. D2087 Mast Light Wiring Harness C-22.