Sometimes even after going through the above two processes, the pedals still feel stuck on the shoe cleats.

Can't clip in peloton shoes. Loosen the top velcro strap by pressing on the buckle at the outer side of the shoe. Take off your feet leaving the shoes on the pedals. The third step is to place.

Wrap the strap around the toe clip. For proper placement, you have to match the cleats with the three screw holes you see on the shoes. Tighten your pedal tension on both sides with the allen wrench completely down.

Set the accelerator pedal to the 6 o’clock position. Next, push the velcro through the buckle to a. If your peloton shoes or cleats get caught on the pedals, the first thing you should do is remove your feet from the.

Now, it is time to bring the right/left pedal to a 6 o’clock position. The first thing to do is if you have some old cleats already, take them off and get your new ones next to you. Here is how to clip on peloton shoes to the pedals.

Now it’s time to clip in. While the pedal remains at the 6 o’clock position, lift up your foot a little higher from it. Remove your shoes and place them on the pedals.

A complete guide to clipping in and out of your pedals: Make sure the delta cleat is under your big toe. Then, put on the shoe, just as you would with other shoes.