Here is the lock we broke in seconds:

Breaking a padlock. Learn all the tricks on how to break a padlock easily. Start by inserting 2 fingers into the padlock's shackle loop and pull up on the shackle to create tension. When drilling the first hole.

It’s not going to be. You can try locking it and giving it a test run. Second, you need to hold the shackle by pulling it away from the body.

First of all you will have to thread your length of rope through the loop on the lock and fold it in half around the shackle as shown in the first photo. One of the easiest ways to break a padlock is with a hammer. If you’re ever in a situation where you need to get through a locked door fast and you don’t have the key you can try breaking the padlock open with a hammer.

One good thing about breaking the padlock using a hammer is that it still works and is not damaged. Alternatively, when a padlock won’t open because of a broken actuator the key may. A typical padlock has a case hardened shackle.

Once the first hole has been marked, measure the distance between the shackle (in this case 25mm) and mark the second hole. 99% of thieves use one of three methods to break a padlock or cut a link in mild steel chain, they are. Next time you get locked out.what you’ll need:

A reliable sign of a broken actuator is when a key keeps turning in the lock. The weak point of disc locks is always the nut holding it together, so our priority should be to break this. It does not matter if you have the best padlock ever made, or even the strongest lock that could even theoretically exist, with the right.