Hold the plywood up against the opening and drill pilot holes through it and into the framing every 16 inches.

Boarding windows with plywood. The building code requires a minimum thickness of ½” (actual thickness 15/32”) or 7/16” osb (oriented strand board) panel. Before you purchase plywood for boarding up your windows, you should first measure the width and. Fabricate and secure plywood over window or door opening.

Label the board for each window. So, be sure to follow it down to a t. Make sure the fit has been made secure and tight.

Continue driving screws through the plywood and into the wall’s framing, working from the top down on both sides before working across the bottom. Barrel bolts (for masonry homes) quick tip #1: Windows and doors that are larger than the sheet of plywood require joining two sheets together with 2×4 bracing along the seam.

Boarding up doors and windows with plywood sheets is one of the most traditional ways to reinforce your home or business before a storm. A broken window requires boarding up to protect the structure's interior from wind, sun and water damage. Make sure that the holes align with the middle of the window frame.

Mount and secure before calling it a day. Preventing damage to windows from a hurricane is possible with this hurricane window protection video from lowe's. This is the final stage of your diy project.

Using the widest side of the 2×4, run it the. First, place your plywood piece inside of your window frame. The cost for materials will be about $50 to $100 for the plywood sheet to cover the window.