Fill with hot (140°f/60°c max) tap water and add the appropriate bissell solution.
Bissell revolution pet pro not spraying water. As with all pumps, the pump on the bissell 2x proheat needs to be primed. The pet pro does not spray solution. Step 2 tilt the handle of the carpet cleaner downward until it rests on the floor.
Examine the bottom of the machine. Occasionally, this filter becomes clogged with small particles to the point where water can't. Make sure the cleaning mode is clearly selected in express mode much less water is applied, switch to.
We would like to show you a description here but the site won’t allow us. Check that the dial located at the top of the tank is set to tools, and that the unit’s handle is locked and upright. Check the bottom of the device to ensure that there are no hair clogs or carpet fibers.
I've tried seating the solution tank as best i can. If there is air in the pump where water should be, as there was when the machine was used for the first time, you. Bissell proheat pet not dispensing soap step 1.
Make sure the colored release clip is facing out away from the machine. Remove any visible carpet fibers or hair clogs that are stuck in the. Buy starting fluid in a spray can from walmat.
If you mark that the soap solution is not spraying, turn off your bissell carpet cleaner as early as possible. If your machine is not spraying yet, check the clean tank for water and/or the water and formula mixture in the tank. The flow indicator filter helps keep solid particles out of the sprayer tubes and nozzles.