The best way to cut vinyl siding is with a sharp blade on a circular saw.

Best way to cut vinyl siding. Draw your line, set a straightedge along the line, and draw a sharp utility knife. If you’re wondering how to cut siding, three ways—particularly for vinyl—exist and here, our siding experts describe how each one works. The best way to remove and install siding vinyl:

You should then have to score along the straightedge using a utility knife. A miter saw would be used for longer, more angled cuts, like when you need to really customize a piece or just have a ton of pieces to cut through. Gable cuts using circular bench saw.

Place the blade on the siding where you want to make the cut and hold the angle grinder with both. To cut siding with an angle grinder, you will need to use a blade designed for cutting metal. Many people prefer using jigsaws or hand saws but these are not as easy to control and less accurate.

Lay the piece of vinyl siding on the workbench and mark a straight line over the point you want to cut. It needs to be cut to match the. The bottom of the starter strip (the part the bottom panel hooks on to) should be at least 1 in.

Using a straightedge lengthwise, indicate the places where you intend to cut on the strip. Because vinyl is so pliable and thin, you can work well using a utility knife, particularly when you are trying to be precise and clean. The ultimate siding cutting tutorial.

Mark the part of siding you want to cut. When using tin snips to cut siding, avoid closing the blades completely at the end of a stroke. With a utility knife or scoring tool, score the vinyl face up with medium pressure and snap it in.