Installing a mirror on a closet door is an attractive way to visually increase the size of a room.

Attach mirror to door. Now, affix the teeth of the clips on the brick wall where the mirror should be. How to hang a heavy mirror on a door? When the clips are still loose, slide.

Tighten the anchors by turning the screws in a clockwise direction. They were old gym mirrors that my father in law gave which i cut down. Might pay to screw a length of say 20mm by 10mm across door, sit mirror on it to take weight and use some screw on clips from glazier or hardware shop around edge to hold it.

If you don’t ensure a clean surface, the housing might not stick firmly to the vehicle. If you want to stick a mirror instead of drilling, this is possible in principle. Place the hollow anchors clip and hang the mirror.

The spring end of the clip must. Draw a few short pencil lines as guides. Doors are 42 x 77.

The doors are for sliding (bypass) closet doors. Place the mirror on the door between the marks you made and firmly press on the mirror. To add mirrors to your sliding closet doors, purchase mirror and mirror clips with screws, and install them using a philipps head drill bit and philipps screwdriver.

The classical schools tend to recommend against a mirror facing the front door do so because for them, the reflection of a mirror reflects energy back. If you glue the mirror by mirror glue then use a standard caulking gun to apply it. Remove any excess uncured adiseal by wiping it away with a thick cloth.