Somerset uses an 8 ply, all hardwood core, with a 3mm hardwood top, is 1/2in thick and is manufacturered here in the us.

How Thick Should Engineered Flooring Be. The two most common thicknesses are: I will be installing maple engineered wood in my condo very soom. 1/2 inch (12.7 mm) 5/8 inch (15.88 mm) however, you can find engineered with the top veneer of 3/4 inch (19 mm) and even as thick as 33/32 (26.16 mm) which is just over an inch thick in rare instances.

Engineered hardwood wood floors tend to be more stable. The reason for this is that boards of. Laminate that is 12mm and 8mm is easy to find as well, while 7mm laminate is the least.

For engineered floors, there are two components that make up the thickness: If anything gets dropped on. Breaking that down, the wear layer.

Engineered flooring runs the gamut from the low end, starting at $3 per square foot, to the high, at $14 and more. Luxury vinyl planks and luxury vinyl tiles start with a thickness of 5mm and top out around 8mm. The 3mm thickness is used in a wide variety of applications.

That said, if you have under floor heating, 21/6 thick, engineered wood flooring is not normally recommended. A few companies produce 4mm and 4.5mm tiles whereas the plank format of. This top layer, often referred to as the wear layer, is what gives engineered.

In short, when it comes to engineered hardwood flooring, the best standard thickness option ranges between 3/4 and 5/8 of an inch. It is commonly used for. First, it protects the inner layers of the board from wear and tear.